Craftsmanship That Outlasts the Building Around It
Brick, stone, block, and veneer masonry for Cedar City and Iron County. Residential accents, full facades, structural walls, fireplaces, retaining walls, and commercial masonry.
Good masonry takes more than mortar and a level
Old-trade craftsmanship, modern engineering
- ✓Brick and stone bond patterns selected for the architecture
- ✓Tinted mortar to match historic or design intent
- ✓Through-wall flashing and weep holes behind veneer
- ✓Structural footings engineered for retaining and bearing walls
- ✓Tooth-in repair and addition matching for older masonry
Masonry installation scope
Brick Masonry
Full brick veneer, thin brick, paving, structural brick. Residential and commercial.
Natural Stone
Cut stone, fieldstone, flagstone, dry-stack and mortared. Walls, columns, fireplaces.
Stone Veneer
Adhered and anchored thin stone veneer over existing or new substrate.
CMU Block
Structural block walls, retaining walls, basement walls, foundations.
Fireplaces & Chimneys
Indoor and outdoor masonry fireplaces, chimney rebuilds, hearths.
Retaining Walls (Masonry)
Mortared stone, brick, and CMU retaining walls. Engineered when required.
Repair & Restoration
Tuckpointing, brick replacement, historic masonry restoration.
Commercial Masonry
Storefronts, columns, structural CMU, fire-rated walls.
Why masonry deserves A to Z
Real Craft Experience
Crews who've laid thousands of square feet — not a framing crew trying their hand.
Design-Sensitive
Bond pattern, mortar color, and joint tooling chosen for the project.
Detail-Driven
Flashing, weep holes, expansion joints — the parts that make veneer last decades.
Integrated With Other Trades
Structural masonry coordinated with framing, concrete, and roofing.
Stone fireplace + chimney rebuild — Brian Head
A 1970s ski cabin with a deteriorated stone chimney that had partially separated from the structure. We dismantled the chimney to the firebox, rebuilt the flue with a stainless liner, re-laid the stone using salvaged material plus matched new stone, and tied the new chimney into the structure with proper flashing and expansion gaps. The owners now have a working fireplace and a chimney good for another fifty years.
Representative project example — replace with real details before launch.
Frequently Asked
Q.What types of masonry do you install?
Brick (full and thin), natural stone (cut, veneer, fieldstone, flagstone), CMU block (structural and architectural), and adhered or anchored stone veneer. Residential and commercial.
Q.Can you match existing masonry on an addition or repair?
Yes. We source matching brick, stone, and mortar color whenever possible, and tooth in new work to existing courses so the seam reads as original construction.
Q.Do you do structural masonry or just decorative?
Both. CMU block walls, structural brick bearing walls, engineered retaining walls, and decorative veneer all in scope.
Q.How long does masonry last?
Properly installed brick and stone masonry lasts 100+ years. The mortar joints typically need re-pointing every 50–75 years; the units themselves outlast the building.
Pairs Well With
Most A to Z projects span more than one trade. Here's what typically goes together:
Ready to start your project?
Free estimates · Licensed B-100 contractor · Cedar City, Iron County & Southern Utah